Omni Launch KR
Omni Launch KR

Omni Awair Air Monitor (shipping included)

$415.00

Air quality monitoring that fits your lifestyle

Awair’s signature design of a fan and laser sensor has been tested and modified since Awair’s founding in 2013 to make it the leader in IAQ technology.Read your sensor data directly on the device. Awair Omni shows your air data in real time.

Feel Safe at Home, Always

  • Worried your cleaning supplies are emitting too many chemicals or cooking with a gas stove or outside elements like smoke from wildfires?

  • Want to monitor your CO2 to make sure everyone doesn’t get headaches or too tired when working from home, doing homework or trying to get a good sleep?

  • Want to make sure your home’s humidity is under 50% so mold stays away?

  • Awair Omni will let you know if your VOCs, Particulates, Humidity, and CO2 are high so you can turn up your air purifier or open windows.

  • If it’s higher then you can consult DesignWell Studios for testing and consulting on improving your indoor air quality.

  • The most accurate airflow design on the market!

Why Monitor TVOC levels?

Awair Omni’s TVOC sensor measures total VOC levels rather than individual chemicals. There are several reasons why VOCs are measured collectively rather than individually: 

  • The EPA’s Technical Assistance Document for Sampling and Analysis of Ozone Precursors lists more than 90 target VOCs that have potentially negative health effects. Their Substance Registry Service lists over 230 potential VOCs. To measure each VOC individually, you’d need an individual sensor for each.

  • VOCs tend to co-occur. In other words, if a few of the VOCs in the above lists are present (related to a specific source), others are likely to be there as well. Ventilation or removal of the chemical pollution source will generally help reduce all VOCs that are present.

  • VOCs have a cumulative effect on health and comfort. In other words, the more VOCs that are present, the greater the risk to your health. For example, numerous VOCs are asphyxiants. Asphyxiants displace oxygen in the blood. If a person breathes in multiple asphyxiants, each one is working to displace oxygen in the blood and the effects will be compounded.

Click here to check the Air Quality Levels Guide

What Chemicals (TVOCs) Does Awair Detect?

What is a TVOC Baseline?

Shipping included

Return Policy
If for some reason you think it isn't working properly we can send you a return label to have it tested by the manufacturer if it is within 30 days. If there is something faulty with the machine, the company will exchange it and send it back to you.

Air quality monitoring that fits your lifestyle

Awair’s signature design of a fan and laser sensor has been tested and modified since Awair’s founding in 2013 to make it the leader in IAQ technology.Read your sensor data directly on the device. Awair Omni shows your air data in real time.

Feel Safe at Home, Always

  • Worried your cleaning supplies are emitting too many chemicals or cooking with a gas stove or outside elements like smoke from wildfires?

  • Want to monitor your CO2 to make sure everyone doesn’t get headaches or too tired when working from home, doing homework or trying to get a good sleep?

  • Want to make sure your home’s humidity is under 50% so mold stays away?

  • Awair Omni will let you know if your VOCs, Particulates, Humidity, and CO2 are high so you can turn up your air purifier or open windows.

  • If it’s higher then you can consult DesignWell Studios for testing and consulting on improving your indoor air quality.

  • The most accurate airflow design on the market!

Why Monitor TVOC levels?

Awair Omni’s TVOC sensor measures total VOC levels rather than individual chemicals. There are several reasons why VOCs are measured collectively rather than individually: 

  • The EPA’s Technical Assistance Document for Sampling and Analysis of Ozone Precursors lists more than 90 target VOCs that have potentially negative health effects. Their Substance Registry Service lists over 230 potential VOCs. To measure each VOC individually, you’d need an individual sensor for each.

  • VOCs tend to co-occur. In other words, if a few of the VOCs in the above lists are present (related to a specific source), others are likely to be there as well. Ventilation or removal of the chemical pollution source will generally help reduce all VOCs that are present.

  • VOCs have a cumulative effect on health and comfort. In other words, the more VOCs that are present, the greater the risk to your health. For example, numerous VOCs are asphyxiants. Asphyxiants displace oxygen in the blood. If a person breathes in multiple asphyxiants, each one is working to displace oxygen in the blood and the effects will be compounded.

Click here to check the Air Quality Levels Guide

What Chemicals (TVOCs) Does Awair Detect?

What is a TVOC Baseline?

Shipping included

Return Policy
If for some reason you think it isn't working properly we can send you a return label to have it tested by the manufacturer if it is within 30 days. If there is something faulty with the machine, the company will exchange it and send it back to you.

Installation Steps

  1. Start with Surface Mount and the In-Wall Mount "Backpack" assembly (install-omni.getawair.com).

  2. Change the Surface Mount mode switch to position "2", which allows the Surface Mount to get its IP address from the network DHCP server (install-omni.getawair.com).

  3. Connect the Surface Mount to power (PoE Switch, Omni USB-C wall adapter, or Low Voltage AC/DC).

  4. Connect the Surface Mount to an internet-connected Ethernet cable (install-omni.getawair.com).

  5. Wait up to 1 minute for the Surface Mount firmware to update automatically. (you can check at the Local API endpoint: http://{{ip-address}}/settings/data )

  6. Connect the Omni sensor to the Surface Mount (install-omni.getawair.com).

  7. Wait 1-2 minutes, to make sure Omni has download the latest firmware. (a firmware check begins right after bootup - "FW" "UP" "DATE" - and is indicated by a progress bar across the LED Matrix Display - ":::::::::::::::" - followed by a reboot)

  8. Now the Surface Mount is ready to configure via: http://{{ip-address}}/settings

Note: remember to "disable" Cloud Connectivity if the Omni + Surface Mount are intended to be used in an offline / local-only installation scenario.

What are common sources of VOCs?

List of VOCs

Because VOCs occur as a group, measuring and reporting each chemical individually is impractical. Measuring them as a group is simpler and far more effective. Another way to look at VOCs is by category, as shown below.

Some example chemicals (although not exhaustive):

  • Acetone

  • Formaldehyde

  • Acetic Acid

  • Toluene

  • m- & p-Xylenes

  • n-Undecane

  • n-Dodecane

  • Nonanal

  • n-Decane

  • o-Xylene

  • d-Limonene

  • Benzene

  • 1,1,1-Trichloroethane

  • Hexanal

  • Carbon monoxide

  • Ethanol

  • Ethanal

  • Isoprene

  • Methanol

  • Isopropanol

  • Ethylbenzene

  • 1,2,4-Trimethylbenzene

  • Tetrachloroethene

  • Phenol

  • Ethyl acetate

  • 2-Butanone

  • Styrene

  • TXIB

  • 4-Ethyltoluene

  • 2-Butoxyethanol

  • 2-Ethyl-1-hexanol

  • Nonane

  • Octane

  • Butyl acetate

  • n-Hexane

  • Pentanal

  • 1,3,5-Trimethylbenzene

  • a-Pinene

  • Texanol 1&3

  • 4-Methyl-2-pentanone

  • Naphthalene

  • 1-Butanol

  • 1,4-Dichlorobenzene

  • 3-Methylpentane

  • Trichloroethylene

  • Methylene chloride

  • Trichlorofluoromethane

  • t-Butyl methyl ether

  • Trichloro-trifluoroethane

  • Chloroform

  • Carbon tetrachloride

  • 4-Phenylcyclohexene

  • Carbon disulfide

  • Chlorobenzene

  • 1,2,4-Trichlorobenzene

  • 1,2-Dichlorobenzene

  • + additional chemicals comprised of H, C, and O

Support documents
https://support.getawair.com/hc/en-us/categories/360000015067

Connectivity Options

  • Gateway (LoRa)

  • Ethernet (LAN/WAN)

  • BACnet (MS/TP or IP)

  • Transmit data using our encrypted, cloud-based server.

  • Transmit data using a cellular gateway router and attachable, long-range (LoRa) antenna.

  • Transmit data and power using ethernet cable and receive firmware updates.

  • Integrate into your existing BACnet system and transmit data over isolated wiring / LAN

  • Power Options

  • Power cord (USB-C & Adapter)

  • Power over Ethernet (PoE)

  • Power over Electrical Wiring

  • Attach the included power cord to the USB-C port on your device and plug it in to a wall outlet.

  • Attach an ethernet cable to the back of your device using our custom mount solution.

  • Use an in-wall, low-voltage electrical wire with the help of our custom mounting solution.

You Might Also Like